Alloy wire round switch double seat heating pad(XY-9627)

Easy to install
Rated voltage: 12V/24V
Rated power: 25W±5W/sheet~~~18W±3W/sheet
Heating pad size: 27*48cm/30*34cm single control/single and double control
Gear position: 2 gears/5 gears
Applicable models: all models
Can be customized according to customer requirements Can be customized according to customer requirements

One set contains: one switch, one wire harness, two heating plates (carbon fiber, alloy wire optional), one set is suitable for one seat.
note:
1. The applicable voltage of this product is DC12V—DC14V.
2. Turn off the main power of the car before installation to avoid damage to the circuit system of the car and ensure the safety of the installer.
3. During the paving process, the main wiring harness should not be pulled too tightly. The sheath and branch line exposed outside the carpet should be fixed under the seat to ensure that they are not squeezed to prevent short circuits caused by broken wires.
4. The heating pad should be installed smoothly and firmly without wrinkles.
5. The temperature protector must not be squeezed during installation, and cannot be installed under the ties.
6. Ensure that the wires installed in the seat are not squeezed or rubbed against metal parts for a long time.
7. Please do not use other unapproved parts, and our company will no longer guarantee the damage caused by this.
8. Vehicles with airbag sensors in the seats should be disassembled and assembled carefully, and install as required after referring to the manual.
9. Non-professional construction is prohibited during installation.
Installation Notes:
1. Remove the outer seat cover of the seat, and then tear off the double-sided tape on the back of the heating sheet, then paste the heating sheet on the seat and back, and then cover the seat cover. When applying the heat sheet, the seat and back are pasted Be at right angles
2.Place the electrode lead wire of the heating body under the seat from the center seam of the seat and backrest.
3. Insert the temperature controller into the socket of the car cigarette lighter. Then connect the plug of the controller and the socket of the heating element under the seat, then the seat heating system is installed.

--------------------------------------------------------------------------------------------------

X&Y is the professional supplier of driving assist camera system.

X&Y Car Electronic Limited  Make a safer driving!

Skype: xycarcamera

Tel:+86-20-29036269,

Mobile:+86-13288633067